Porcelain Tiles
Matieres Barrique 24" x 48"

Login to view price

7.75 SqFt Per Piece
2 Pieces Per Box
15.50 SqFt Per Box
In Stock (6,402 SqFt)
Product Sold By The Box



This Matieres Barrique 24x48 porcelain tile comes in a matte finish.

The tile uses inkjet technology, making it possible for more realistic reproductions of other surface materials. This tile has a variation rating of V3, which gives it about 10-15 unique faces.

This tile is rectified, meaning it has been precisely cut around the edges in order to be installed with minimal grout lines, which makes for an almost-seamless, clean look.

PEI measures a tile's durability and ability to withstand foot traffic. This is rated on a scale of 1-5, with 5 being the hardest. This tile is rated at 4 PEI, suitable for residential, medium commercial, and light institutional applications.


WARNING: This product can expose you to chemicals including crystalline silica (airborne particles of respirable size) in dust created during fabrication/installation if the product is dry cut/ground or pulverized, which are known to the State of California to cause cancer. For more information, go to https://www.p65warnings.ca.gov/.

Series Matieres
Type Porcelain Tiles
Thickness 3/8 in (10 mm)
Weight Per Piece 35.61 Lbs
Edge Rectified
Country of Origin Italy
Finish Matte
Colors Brown Black

Technical Specification
Abrasion Resistance 140 mm3
Application Floor & Wall
Breaking Strength, in N 3200 N
Chemical Resistant Resistant
DCOF Acutest >0.42
DIN 51130 R10
Frost Resistant Resistant
MOHS (Scratch Resistant) 8
PEI Rating 4
Shade Variation V3 (10-15 faces)
Staining Resistance Class 4
Thermal Shock Resistant
Type of Porcelain Glazed Tile
Water Absorption 0.08%

Print Specification


Box
Pieces Per Box 2
Square Feet Per Box 15.50
Weight Per Box 71.22 lbs.

Pallet
Boxes Per Pallet 30
Square Feet Per Pallet 465.00
Weight Per Pallet 2136.60 lbs.
Pallet Length 47.00
Pallet Width 32.00
Pallet Height 30.00

Tile Installation Guidelines

The owner or owner’s representative is responsible for determining the acceptability of the product prior to installation. All Installations should be done by a professional tile installer.


1. Verifying The Product and Dye Lot Consistency Thoroughly inspect all products before installation as use will constitute acceptance. Installed flooring is considered the property of the owner/installer and cannot be exchanged or returned for any reason.

2. Hire Only Skilled Tile Installers Only well-trained and experienced tile installers can produce installations of the highest quality which provide long lasting beauty and functionality. In order to differentiate this quality oriented tile installer from others in the field, consider hiring a CTEF Certified Tile Installer (CTI). CTIs have proven that they have the knowledge and skills which meet industry standards and best practices.

3. Incorporate Movement Accommodation Joints in the Tile Installation: All tile installations, both residential and commercial, will move with temperature and humidity variations. To accommodate this expansion and contraction activity, the use of expansion joints per the TCNA Handbook for Ceramic, Glass and Stone Tile Installation method EJ171 must be incorporated into the tile work. As stated in the Handbook, “The architect or designer shall show the specific locations and details of movement joints on project drawings.” Be certain that all parties involved in the project including the architect, the specifier, the designer, the salesperson and the tile installer know and understand the critical use and placement of expansion joints.

4. Work Only With Premium Materials to Install Tile The use of premium quality bonding materials is money well spent. Tile Industry experts agree this is one of the easiest insurance policies for preventing installation problems. All types of setting materials are available in various performance grades to meet the requirements of the job. Contact the setting material manufacturer for products with the specific characteristics and performance levels necessary for success.

5. Confirm that Tile Installation Surfaces are Flat In order to provide a flat ceramic or stone tile installation, carpenters, masons, concrete installers and other trades must meet the tile industry standards for flatness tolerances. If substandard surfaces are encountered, they must be corrected before installation begins. Otherwise, you will not have a quality tile installation.

6. Verify that the Tile Installation Surface is Rigid Ceramic tile installations require a stiff or rigid surface. In some cases, installations, including natural stone, may require additional subflooring, wall studs or bracing. Realize that the substrate for natural stone tile installations must be twice as rigid as that for a ceramic or porcelain tile installation. Tile contractors should follow the applicable recommendations of the TCNA Handbook for Ceramic, Glass and Stone Tile Installation, the ANSI (American National Specifications for the Installation of Ceramic Tile) as well as the recommendations of the manufacturer’s products being used in the project.

7. Minimum Mortar Coverage Must Be Provided Tile industry standards require minimum mortar coverage of 80% in dry areas and 95% in wet (showers) or exterior areas. Natural stone tile installations require 95% coverage in all applications. This refers to the contact area of the bonding material (thin-bed mortars, large and heavy tile mortars or epoxy adhesives) with both the back of the tile and the surface being tiled.

8. Ensure that Tile Site Conditions Are Controlled Jobsite conditions can have a serious impact on the success or failure of a tile installation. Many products used in tile installations require that the temperature be maintained within a specific range and duration. Be certain to follow the manufacturer’s guidelines to ensure a long-lasting installation.

9. Use Only the Correct Tile Installation Methods and Materials Not all installation methods and/or materials are suitable for all applications. Be certain that your contractor will use the TCNA Handbook method rated for the intended application or a method that is recommended, fully specified, and warranted by the product manufacturer. Research manufacturer’s websites to determine suitability, application recommendations and product warranty information. Just because a product is available doesn’t mean that it is appropriate for a given installation.

10. Allow for Adequate Cure Time Allow a tile installation to cure sufficiently per the manufacturer's recommendations before exposing it to moisture, traffic, temperature changes or overlaying products. Otherwise it will not perform as a quality tile installation. The amount of time required will vary based on site conditions and the specific materials being used.

11. Make Use of Crack Isolation Membranes as Needed Cracks in concrete and other areas of movement should be treated with a crack isolation membrane to help eliminate cracked tiles. Check with the membrane manufacturer for specific use and application recommendations.

12. Insure Tile Contractor Cleans The Tile After Installation Very Important! Insure tile contractor cleans all grout as part of job. Too many floors are left with a grout haze which has customers scrambling to clean. Should be a major part of contract



Matieres Series


Matieres Barrique 12 x 24

Matieres Barrique
12" x 24"

Matieres Barrique 24 x 48

Matieres Barrique
24" x 48"

Matieres Barrique 32 x 32

Matieres Barrique
32" x 32"

Matieres Barrique Modulo Listello 8.50 x 16

Matieres Barrique Modulo Listello
8.5" x 16"

Matieres Barrique Mosaico 12 x 12

Matieres Barrique Mosaico
12" x 12"

Matieres Brun 12 x 24

Matieres Brun
12" x 24"

Matieres Brun 24 x 48

Matieres Brun
24" x 48"

Matieres Brun 32 x 32

Matieres Brun
32" x 32"

Matieres Brun Modulo Listello 8.50 x 16

Matieres Brun Modulo Listello
8.5" x 16"

Matieres Gris 12 x 24

Matieres Gris
12" x 24"

Matieres Gris 24 x 48

Matieres Gris
24" x 48"

Matieres Gris 32 x 32

Matieres Gris
32" x 32"

Matieres Gris Modulo Listello 8.50 x 16

Matieres Gris Modulo Listello
8.5" x 16"

Matieres Gris Mosaico 12 x 12

Matieres Gris Mosaico
12" x 12"

Matieres Mou 12 x 24

Matieres Mou
12" x 24"

Matieres Mou 24 x 48

Matieres Mou
24" x 48"

Matieres Mou 32 x 32

Matieres Mou
32" x 32"
Out of Stock

Matieres Mou Modulo Listello 8.50 x 16

Matieres Mou Modulo Listello
8.5" x 16"

Matieres Mou Mosaico 12 x 12

Matieres Mou Mosaico
12" x 12"

Matieres Nuage 12 x 24

Matieres Nuage
12" x 24"

Matieres Nuage 24 x 48

Matieres Nuage
24" x 48"

Matieres Nuage 32 x 32

Matieres Nuage
32" x 32"

Matieres Nuage Modulo Listello 8.50 x 16

Matieres Nuage Modulo Listello
8.5" x 16"

Matieres Nuage Mosaico 12 x 12

Matieres Nuage Mosaico
12" x 12"

Matieres Sable 12 x 24

Matieres Sable
12" x 24"

Matieres Sable 24 x 48

Matieres Sable
24" x 48"

Matieres Sable 32 x 32

Matieres Sable
32" x 32"

Matieres Sable Modulo Listello 8.50 x 16

Matieres Sable Modulo Listello
8.5" x 16"

Matieres Sable Mosaico 12 x 12

Matieres Sable Mosaico
12" x 12"

Copyright © Elysium Mosaics Inc. 2013-2019. All Rights Reserved